NEATTECH · HUMANSCALE DESIGN STUDIO
NeatTech Mesh: a place for every connection.
The best part of a well-organized desk is the space it gives back. NeatTech Mesh gathers power cords, adapters and compatible power strips beneath the work surface in a soft-sided basket. Your connections stay close to the equipment they serve, while the floor and the area around your feet become easier to use.

A cleaner surface. A calmer space below.
Instead of letting loose cords hang between the desktop and the floor, route them into the basket. Its flexible construction creates a defined place for excess cable length and power adapters without enclosing everything in a rigid box. Internal fastening strips hold the contents in position, helping your workstation stay organized as equipment changes.

Follow your desk from sitting to standing.
Mounted under the desktop, NeatTech rises and lowers with a height-adjustable desk. Keep connections together near the work surface, with sufficient slack for the cables that run to the wall. Check the desk’s full travel before use and keep cords clear of the moving frame. The same basket can also organize a suitable fixed-height desk.

Fold down. Reconnect. Carry on.
A tidy setup should still be easy to change. Release the basket from the accessible hooks and fold it down to reach a charger or exchange a cable. The internal hook-and-loop straps keep compatible items together while you work. Once everything is arranged, lift and secure the basket again.

A considered route for every connection.
The cable pass-through reveal provides an opening for cords to enter and leave the basket. Bring device cables down from the desktop, contain excess length inside and route power toward the outlet. Avoid tight bends and maintain the ventilation and clearances required by the equipment placed in the basket.

Mesh: light, open and practical.
Choose Pinstripe Mesh in Graphite or White with Gray trim, or Catena Mesh in Black with Black trim or Poppy Seed with Gray trim. The open textile gives NeatTech a lightweight appearance and a flexible place for everyday connections. Mesh is the straightforward choice when you want cable storage that stays visually discreet.

One design. Three lengths.
Mini is 24 in (610 mm) long, Small is 38 in (965 mm) and Large is 48 in (1219 mm). The supplier’s drawing shows a 4 in (102 mm) by 4.5 in (114 mm) cross-section. Measure the usable area beneath your desktop, allowing room for the desk frame, controls and the basket to open. Choose your size and color; the SKU, price and product images follow the selection. Use the material selector to explore the other NeatTech versions.

Four screws, with the right preparation.
The mounting hooks attach beneath the work surface with four screws. The guide supplies hole spacing for each size and explains which supplied screw length to use according to desktop thickness. Check that your surface can accept the fasteners before installation. Secure the cables and compatible equipment with the internal straps, then close the basket as directed.

Details that stay useful over time.
NeatTech Mesh supports up to 10 lb (4.5 kg). Power strips, chargers, electronics, desks and other staged accessories are not included. Follow the care instructions for Mesh in Trust & Care. The current Canadian product listing provides a five-year limited manufacturer warranty, subject to its terms. Find the installation guide and size drawing in Specifications.

Choose a size for your workspace.
NeatTech Mesh gives the connections behind your work an accessible place beneath the desk. Choose Mini, Small or Large, then select your finish. Measure the space beneath your desktop and allow enough cable slack for your setup to move and change.
Dimensions and Weight
- Configuration SKUNT1MGG
- Mount typeUnder-desk hooks secured with 4 screws
- Width4 in (102 mm)
- LengthMini: 24 in (610 mm); Small: 38 in (965 mm); Large: 48 in (1219 mm)
- Depth4.5 in (114 mm)
- Overall weightVaries by size; Large: 0.8 kg (1.8 lb)

Materials & sustainability
Flexible Pinstripe or Catena mesh basket with hook-and-loop straps. Maximum supported load: 10 lb (4.5 kg). Power strips and electronics are not included.
This product is backed by Humanscale's official limited warranty, covering defects in materials and workmanship for the original purchaser.
Coverage is non-transferable and excludes normal wear and tear, misuse, accidental damage, unauthorized modification or service, damage during transport, and issues caused by third-party parts, improper maintenance, or conditions outside Apex Stand's control. At its discretion, Apex Stand may repair or replace covered items; doing so does not extend the original warranty term. For full policy details or to file a claim, contact our support team with your order number.
Certifications & Testing
Care & Maintenance
Customer Reviews
Have a question?
We're Here to Help!
What warranty comes with standing desks?
Warranty coverage varies by product category. Many of our seating and desk-base products carry warranties of up to 15 years, with shorter coverage on select components such as fabric, cushions, and arm pads. All warranties apply to the original purchaser only and are non-transferable. Full warranty terms for a specific item are listed on that product's page.
What does the warranty cover?
Our warranty covers defects in materials and workmanship. At the time you receive your product, it will be in good working order and free from such defects for the duration of the warranty term listed on that product's page. If a covered defect is confirmed, we will repair or replace the product or part with the same or a comparable item — repair or replacement does not restart or extend the original warranty period.
What is NOT covered by the warranty?
What the warranty does not cover:
- Normal wear and tear
- Damage from accidents, neglect, misuse, or failure to follow the included installation or usage instructions
- Damage from service, maintenance, modifications, or tampering performed by anyone other than an authorized representative
- Damage occurring during carrier transportation, or alterations made by the owner
- Acts of God, electrical power issues, or failure to perform routine preventative maintenance
- Parts, components, or peripherals not supplied by us
- On leather-upholstered items: natural characteristics such as growth marks, scars, veins, or grain variation, which are typical of genuine leather and not considered defects
- On electric height-adjustable table bases: modifying or tampering with any part of the base voids the warranty
Warranties apply only to the original end-user purchaser, are non-transferable, and require proof of purchase through us. Full terms specific to each product are listed on that product's page.
Do I pay shipping for a warranty replacement?
If your item arrives damaged, shows shortages, or has a delivery issue, note it on the delivery receipt at the time of delivery if possible, then contact us within 24 hours with your order number and photos. We handle the freight claim directly and will review it to determine next steps, including replacement or credit where appropriate.
How do I file a warranty claim?
Contact us at support@apexstand.ca with your order number and photos or a short video showing the issue. We'll open the case and manage the entire process for you.
What height range and weight capacity do your desks and chairs support?
Height range and weight capacity vary by model and configuration. Exact figures — including specific load and surface requirements for electric desk bases — are listed in the specifications section of each product page.
What desktop materials are available?
Depending on the model, worksurfaces are available in the following materials:
- Powder-Coated MDF — a durable, formaldehyde-free core with a smooth, wear-resistant finish
- Laminate — a scratch-resistant, high-pressure surface bonded to a formaldehyde-free MDF core
- Solid Wood — natural grain construction that can be refinished over time
Available materials vary by product and are shown on each product page.
Do I need to assemble my furniture?
Some products require light assembly, while others arrive ready to use. Assembly instructions are included where applicable. Professional installation isn't included with online orders but may be requested for an additional fee (minimum 315 CAD, subject to availability and region).
How do I place, track, or change my order?
- Place an order: Add to cart and check out at apexstand.ca. Need help choosing? Call (514) 447-7026 or email support@apexstand.ca.
- Track your order: Once your order ships, you'll receive tracking information. All parcel shipments include photo proof of delivery and require a signature upon receipt.
- Change or cancel your order: Orders may be modified or cancelled within 24 hours of placement — contact us as soon as possible, since we begin processing orders quickly. Changes requested after 24 hours may not be possible once the order has entered fulfillment.
What is the return policy?
We offer a 30-day satisfaction guarantee. If a return is requested within 30 days of receiving your product, we provide a prepaid return label, provided the item is in resaleable condition and proof of purchase is included. Returns requested between 30 and 90 days may be considered at our discretion and are subject to a 15% restocking fee. All returns require prior authorization — email returns@apexstand.ca to begin the process.
How long do refunds take to process?
Refunds are issued after the returned product is received and inspected, typically within 3–5 business days. If you paid via an installment plan, refunds are processed back through that payment provider, and timing may vary accordingly.
When can I reach customer support?
Our team is available Monday – Friday, 9am – 5pm EST.
📧 support@apexstand.ca
📞 (514) 447-7026
We aim to respond to all emails within 1 business day. For urgent issues, calling is the fastest option.






















