
NEATUP 2.0 · HUMANSCALE DESIGN STUDIO
Cable management that keeps up with your desk.
Moving between sitting and standing should not leave power cords stretched behind the desk or pooled around your feet. NeatUp 2.0 guides connections alongside a height-adjustable desk, extending and retracting as the work surface moves. The result is a more orderly route between the floor and the equipment you use every day.

Three stages. One continuous movement.
The telescopic column follows the desk through its working range, helping keep cables supported as you change position. Its slim vertical form sits beside the desk leg instead of leaving a loose bundle hanging below the desktop. Choose a configuration that matches the connections your workstation needs.

Power, data—or both.
Power Only provides a built-in six-outlet AC power strip. Data Only provides Ethernet connectivity. The Power & Data Bundle combines power and network connectivity in one configuration. All three are offered in Black, Gray and White. Select Configuration and Color above to see the matching SKU, price and product image.

Keep everyday connections close.
For a workstation with a monitor, laptop, task light and chargers, a defined cable route helps the setup feel less crowded. The power configuration brings outlets near your devices, while the data configuration provides a wired network connection. Arrange your equipment and cords according to their instructions, leaving the space and slack needed for the desk to move.

Measure the movement before you mount.
The installation guide specifies a minimum NeatUp height of 18.9 in (48 cm) and a maximum of 51.2 in (130 cm). Confirm your desk fits this mounting range throughout its travel. If it exceeds either limit, the guide requires the desk to be electronically limited to prevent damage. Check the underside and leg for suitable mounting positions before choosing your setup.

A considered connection at both ends.
The upper mounting socket has three positions and the mounting stem rotates through 360° to help avoid structural brackets. The base attaches at the desk foot, and the upper stem fastens beneath the work surface. A drill with a Phillips driver bit and a pencil are required. Allow the supplied adhesive 24 hours to reach full bonding strength; follow the complete guide for fastening and installation.

A clear route below. Storage above.
NeatUp and NeatTech address different parts of the same workstation. NeatUp manages the changing vertical distance as the desk rises and lowers; a separately purchased NeatTech basket can gather adapters and excess cable length beneath the work surface. The desk, NeatTech basket, electronics and other staged accessories in these photos are not included.

Designed to blend into the workspace.
Humanscale Design Studio developed NeatUp to reduce the visual clutter created by exposed cables at standing height and excess length at seated height. Its telescopic form makes the cable route part of the desk rather than another loose item beneath it. Choose Black, Gray or White to coordinate with your workstation.

Useful details for everyday ownership.
The current Canadian listing provides a five-year limited manufacturer warranty, subject to its terms and exclusions. Disconnect power before cleaning. Use bleach-free disinfecting wipes, or a soft cloth with mild soap and water for deeper cleaning; dry thoroughly and avoid abrasive pads or harsh solvents. A little dust may appear on the column during movement: the guide says this can be wiped away with a soft cloth without affecting performance.

Build a setup that moves comfortably.
Choose your power and data configuration, coordinate the color, then confirm the desk’s mounting range and clearances. The dimensional drawing and bilingual installation guide in Specifications help you plan a compatible installation before the first lift.
Dimensions and Weight
- Configuration SKUNU2NAPWB
- Mount typeDesk-foot base and under-desktop mounting stem
- Height18.9–51.2 in (48–130 cm); confirm desk travel before installation

Materials & sustainability
Three-stage telescopic cable-management column. Power Only: 6 AC outlets. Data Only: Ethernet connectivity. Power & Data Bundle: both functions. Black, Gray or White. Desk, NeatTech basket and staged electronics sold separately.
This product is backed by Humanscale's official limited warranty, covering defects in materials and workmanship for the original purchaser.
Coverage is non-transferable and excludes normal wear and tear, misuse, accidental damage, unauthorized modification or service, damage during transport, and issues caused by third-party parts, improper maintenance, or conditions outside Apex Stand's control. At its discretion, Apex Stand may repair or replace covered items; doing so does not extend the original warranty term. For full policy details or to file a claim, contact our support team with your order number.
Certifications & Testing
Care & Maintenance
Customer Reviews
Have a question?
We're Here to Help!
What warranty comes with standing desks?
Warranty coverage varies by product category. Many of our seating and desk-base products carry warranties of up to 15 years, with shorter coverage on select components such as fabric, cushions, and arm pads. All warranties apply to the original purchaser only and are non-transferable. Full warranty terms for a specific item are listed on that product's page.
What does the warranty cover?
Our warranty covers defects in materials and workmanship. At the time you receive your product, it will be in good working order and free from such defects for the duration of the warranty term listed on that product's page. If a covered defect is confirmed, we will repair or replace the product or part with the same or a comparable item — repair or replacement does not restart or extend the original warranty period.
What is NOT covered by the warranty?
What the warranty does not cover:
- Normal wear and tear
- Damage from accidents, neglect, misuse, or failure to follow the included installation or usage instructions
- Damage from service, maintenance, modifications, or tampering performed by anyone other than an authorized representative
- Damage occurring during carrier transportation, or alterations made by the owner
- Acts of God, electrical power issues, or failure to perform routine preventative maintenance
- Parts, components, or peripherals not supplied by us
- On leather-upholstered items: natural characteristics such as growth marks, scars, veins, or grain variation, which are typical of genuine leather and not considered defects
- On electric height-adjustable table bases: modifying or tampering with any part of the base voids the warranty
Warranties apply only to the original end-user purchaser, are non-transferable, and require proof of purchase through us. Full terms specific to each product are listed on that product's page.
Do I pay shipping for a warranty replacement?
If your item arrives damaged, shows shortages, or has a delivery issue, note it on the delivery receipt at the time of delivery if possible, then contact us within 24 hours with your order number and photos. We handle the freight claim directly and will review it to determine next steps, including replacement or credit where appropriate.
How do I file a warranty claim?
Contact us at support@apexstand.ca with your order number and photos or a short video showing the issue. We'll open the case and manage the entire process for you.
What height range and weight capacity do your desks and chairs support?
Height range and weight capacity vary by model and configuration. Exact figures — including specific load and surface requirements for electric desk bases — are listed in the specifications section of each product page.
What desktop materials are available?
Depending on the model, worksurfaces are available in the following materials:
- Powder-Coated MDF — a durable, formaldehyde-free core with a smooth, wear-resistant finish
- Laminate — a scratch-resistant, high-pressure surface bonded to a formaldehyde-free MDF core
- Solid Wood — natural grain construction that can be refinished over time
Available materials vary by product and are shown on each product page.
Do I need to assemble my furniture?
Some products require light assembly, while others arrive ready to use. Assembly instructions are included where applicable. Professional installation isn't included with online orders but may be requested for an additional fee (minimum 315 CAD, subject to availability and region).
How do I place, track, or change my order?
- Place an order: Add to cart and check out at apexstand.ca. Need help choosing? Call (514) 447-7026 or email support@apexstand.ca.
- Track your order: Once your order ships, you'll receive tracking information. All parcel shipments include photo proof of delivery and require a signature upon receipt.
- Change or cancel your order: Orders may be modified or cancelled within 24 hours of placement — contact us as soon as possible, since we begin processing orders quickly. Changes requested after 24 hours may not be possible once the order has entered fulfillment.
What is the return policy?
We offer a 30-day satisfaction guarantee. If a return is requested within 30 days of receiving your product, we provide a prepaid return label, provided the item is in resaleable condition and proof of purchase is included. Returns requested between 30 and 90 days may be considered at our discretion and are subject to a 15% restocking fee. All returns require prior authorization — email returns@apexstand.ca to begin the process.
How long do refunds take to process?
Refunds are issued after the returned product is received and inspected, typically within 3–5 business days. If you paid via an installment plan, refunds are processed back through that payment provider, and timing may vary accordingly.
When can I reach customer support?
Our team is available Monday – Friday, 9am – 5pm EST.
📧 support@apexstand.ca
📞 (514) 447-7026
We aim to respond to all emails within 1 business day. For urgent issues, calling is the fastest option.